to main content Medical Equipment - Sharps/Needle Boxes Risk Assessment | Assisted Living Community | Environment of Care EC | The Joint Commission
Medical Equipment - Sharps/Needle Boxes Risk Assessment

What are the specific requirements for the deployment of sharps containers?

Any examples are for illustrative purposes only.

The Joint Commission references OSHA's Bloodborne Pathogen Standard (1910.130) applies to occupational exposure to blood or other potentially infectious materials in healthcare settings.  All organizations must follow this requirement.

Additionally, The Joint Commission standard EC.02.01.01 requires organizations to conduct a comprehensive risk assessment to determine but not limited to:
  • Type of containment devices
  • Locations
  • Patient population
  • Secure storage and transit (access control)
  • Procedures and controls to be implemented
  • Potential adverse impact of equipment
  • Potential risk to the occupants
  • Potential risk to visitors (perhaps with small children)
Multi-disciplinary input should include; infection control, risk management, and the safety officer.

NIOSH recommended wall mounting height:
  • Standing workstation: 52 to 56 inches above the standing surface of the user
  • Seated workstation: 38 to 42 inches above the floor on which the chair rests
These height installation recommendations from NIOSH will comfortably accommodate 95% of all adult female workers.

Additional Resources:
Occupational Safety and Health Administration (OSHA) Bloodborne Pathogen Standard (1910.130)
The Centers for Disease Control (CDC) Guidelines Sharps Disposal Containers
National Institute for Occupational Safety and Health (NIOSH) Selecting, Evaluating, and Using Sharps Disposal Containers
Manual: Assisted Living Community
Chapter: Environment of Care EC
First published date: April 11, 2016 This Standards FAQ was first published on this date.
This page was last updated on October 21, 2021

If no, please comment on how we could improve this response.

If you have additional standards-related questions regarding this topic, please use the Standards Online Submission Form