to main content Manufacturers Instructions for Use - Expectations Regarding Access To IFUs for Medical Instruments and Devices | Critical Access Hospital | Leadership LD | The Joint Commission
Manufacturers Instructions for Use - Expectations Regarding Access To IFUs for Medical Instruments and Devices

What are The Joint Commissions expectations regarding access to manufacturer's instructions for use (IFU) for cleaning, disinfection, and/or sterilization of instruments, devices and products used in the delivery of patient care?

Any examples are for illustrative purposes only.

IFUs for Medical Instruments and Devices:
The Joint Commission requires organizations to provide access to information needed to support the Infection Prevention and Control program. The FDA requires manufacturers of medical instruments and devices to provide specific instructions on how to properly clean and/or disinfect these items.  These Instructions for Use (IFUs) include the steps required for cleaning, disinfection, the level of disinfection required (e.g., sterilization, high level disinfection, low or intermediate level disinfection), the frequency of disinfection, and the products which are compatible for use on device. IFUs may include information about maximum number of times the item may be reprocessed as well as storage requirements.  It is important to understand that each patient care item has its own IFUs for cleaning and disinfection and the expectation is that the organization will follow those instructions. Failure to follow such instructions or misuse creates significant risk to safe, quality care.

IFUs for Cleaning, Disinfection and Sterilization Products:
Products used during cleaning, disinfection and sterilization include specific IFUs to ensure efficacy and/or confirmation that cleaning, disinfection or sterilization cycles are successful.  Accredited organizations must follow instructions for quality control of the process, including dilution of products, efficacy testing of the solution or process, exposure times, and acceptable temperature and pressure ranges.  
Manual: Critical Access Hospital
Chapter: Leadership LD
First published date: November 08, 2019 This Standards FAQ was first published on this date.
This page was last updated on October 21, 2021
Was this response helpful?

If no, please comment on how we could improve this response.

If you have additional standards-related questions regarding this topic, please use the Standards Online Submission Form

Get Extra Help with Books and E-books

Browse our gallery of books and e-books to find trusted prep and readiness resources, practical checklists and toolkits, and resources on specialized health care topics.

Stay Informed with Online Education

Online education is the most convenient and cost-effective way to educate your staff and minimize expenses without the need to leave your organization.

Reach Your Safety Goals with eProducts

Assessing and sustaining compliance with accreditation standards or CMS CoPs can be a challenge, but it doesn’t have to be. Rely on our proven software solutions developed by our team of industry experts.

Can't Find What You're Looking For?

If you do not find an answer to your question, please contact the Standards Interpretation Group (SIG).

Note: To provide adequate support to those organizations that are either accredited/certified or seeking accreditation/certification, we will only answer those questions submitted by those organizations seeking accreditation/certification or currently accredited/certified by the Joint Commission. The Joint Commission no longer answers questions submitted by students or vendors. Thank you for your understanding.