Exit Stairwell -Items In Stairwells
What are the restrictions on items being mounted or installed in exit enclosures such as stairwells?
Any examples are for illustrative purposes only.
The Joint Commission uses the 2012 edition of NFPA 101 Life Safety Code. For consistency, no equipment is allowed in an exit enclosure (exit stairwell) that could interfere with its function as an area of refuge in accordance with section 7.1.3.2.3. This would include evacuation chairs/sleds.
Security cameras, card readers, Wi-Fi routers and repeaters can be in the exit enclosure, so long as it doesn't interfere with the use of the exit and is used for surveillance of the exit enclosure. In accordance with 7.1.3.2.1, systems in an exit enclosure are limited to systems that support the functionality of the exit enclosure in new health care and ambulatory health care occupancies.
Any penetrations into the rated exit enclosure must be sealed with a fire stop material that is appropriate to the rating of the enclosure. Properly protected system penetrations into existing (prior to July 5, 2016) exit enclosures are acceptable as long as they were part of the original construction and no alterations have since been made; once an alteration has been made, the current code should be followed.
Reference LS.02.01.20 EP 13, LS.03.01.20 EP 11
The Joint Commission uses the 2012 edition of NFPA 101 Life Safety Code. For consistency, no equipment is allowed in an exit enclosure (exit stairwell) that could interfere with its function as an area of refuge in accordance with section 7.1.3.2.3. This would include evacuation chairs/sleds.
Security cameras, card readers, Wi-Fi routers and repeaters can be in the exit enclosure, so long as it doesn't interfere with the use of the exit and is used for surveillance of the exit enclosure. In accordance with 7.1.3.2.1, systems in an exit enclosure are limited to systems that support the functionality of the exit enclosure in new health care and ambulatory health care occupancies.
Any penetrations into the rated exit enclosure must be sealed with a fire stop material that is appropriate to the rating of the enclosure. Properly protected system penetrations into existing (prior to July 5, 2016) exit enclosures are acceptable as long as they were part of the original construction and no alterations have since been made; once an alteration has been made, the current code should be followed.
Reference LS.02.01.20 EP 13, LS.03.01.20 EP 11
Manual:
Home Care
Chapter:
Life Safety LS
Last reviewed by Standards Interpretation: July 05, 2023
Represents the most recent date that the FAQ was reviewed (e.g. annual review).
First published date: April 11, 2016
This Standards FAQ was first published on this date.
This page was last updated on July 05, 2023
with update notes of: Review only, FAQ is current
Types of changes and an explanation of change type:
Editorial changes only: Format changes only. No changes to content. |
Review only, FAQ is current: Periodic review completed, no changes to content. |
Reflects new or updated requirements: Changes represent new or revised requirements.